Evergain PU Foam --Herbal Seven effectives
Introduction:
This product is a multi-component moisture-curing polyurethane foam. It has a high expansion and adhesion, low thermal conductivity, low water absorption, high insulation resistance, etc., and has a good waterproof, heat insulation, sound insulation, moisture, shock compression and other functions. Product formed after curing foam delicate, flexibility, toughness good filling body for long periods without cracking corruption, various structural parts in different materials for filling bonding. It is simple use, fast curing, the use of strong, low cost, versatile features. This product meets the Montreal environmental agreements, 100% free of Freon.
Application：
Various types of door frames fixed bond padding and insulation and waterproof; wall, roof and building envelope insulation and waterproof boards closed side sealed; various pipe sealing, insulation, thermal insulation, sealing and fill in the blank; air-conditioning installation caulk and sealing; pools, hot tubs and bath filler fill joints between; freezer seal; interior of the things fixed, bonding, filling, insulation; various types of electrical switch box mounting location and insulation, etc.
Evergain PU Foam --Herbal Seven effectives
Energy saving (heat insulation, sound absorption, waterproof); absorption of formaldehyde and other harmful factors and release of natural aromatic; developed by use of botanicals; adhesive power, flexible, high hardness; large expansion ratio, contraction coefficient ; insect, termite and moth proof; excellent anti-aging.
Packing Net content: 750ml Packing: 1 box x15
Tecnical Data:
● Ingredients: contains many multi-methyl phenyl isocyanate
● Product properties: stable foam, Freon-free
● The maximum amount of expansion: 70 times
● Foam Density: ≥ 10kg/m3
● Thermal conductivity: W / (mk) (350C): ≤ 0.050 (350C)
● Dimensional change rate: (23 ± 20C, 48 hours): 0.5 ~ 5.0%
● Surface Curing time: ≤ 15mins
● Full cure time: 60 to 90 minutes
● Water Penetration: no leakage
● Bond strength: (tensile) PVC bonding between the plates, ≥ 80Kpa
● Bond strength: (tensile) bonded between aluminum, ≥ 80Kpa
● Operating temperature range: 5 ~ 400C
● Temperature range: -10 ~ +800 C
● Product special: For most materials have a strong adhesion (except gypsum, oil or oily material ), high heat preservation, noise proof , and it does not become shrink or dry.
Method:
1, Remove surface dirt, grease, dust, water will fill the area wet.
2, Use in the 5-40 ℃.
3, Shake the tank for 1 minute.
4, Take off the lid, the tip / nozzle screw on the tank upside down, the tip / nozzle into the hole at the bottom, slowly push grip foam, spray from the bottom, just fill the gap of 50 %, causing it to swell.
5, 10-30 minutes, dry, filled within 24 hours of completion.
6, The construction has been completed, with a special cleaning agent immediately remove the nozzle and valve superfluous bubble.
Attention:
After you are finished using foam sealant and put the cleaning agent in a minute.
When cleaning the gun, the gun trigger should be washed several times to make sure gun is fully cleaned.
1.Cleaning agent can be a valve on the tank, such as uncured external spray Foam.
Use protective gloves and goggles should be worn to keep the environment ventilated area away from open flame.
In the event of an accident, feeling unwell, dashing to the hospital.
2, Evergain special use foam glue gun